Pool Table Turned Dining Table

Billiard tables, also known as pool tables, are not only meant for playing the game of billiards. They can also be transformed into a unique and stylish dining table. This unconventional repurposing not only saves space but also adds a touch of whimsy and character to your dining room. Here's a comprehensive guide on how to convert a pool table into a dining table:

Materials Required:

Pool table with slate or MDF base
Table legs or pedestal
Plywood or MDF sheet (cut to the size of the table surface)
Felt or fabric (for covering the plywood)
Wood filler
Sandpaper
Primer
Paint or stain
Screws or bolts
Adhesive

Step-by-Step Instructions:

1. Prepare the Pool Table:

Empty the pool table and remove all accessories. Cover the felt on the table surface with a drop cloth or plastic wrap to protect it from damage.

2. Remove the Pool Table Legs:

Using a wrench or screwdriver, carefully remove the legs from the pool table. If the legs are attached with bolts, you may need to apply some penetrating oil to loosen them. Once the legs are removed, flip the pool table upside down.

3. Install the Dining Table Legs:

Attach the dining table legs or pedestal to the underside of the pool table using screws or bolts. Ensure that the legs are securely fastened and provide adequate support for the table.

4. Create the Tabletop:

Cut a piece of plywood or MDF to the same size as the pool table surface. Place the plywood sheet on top of the pool table and secure it with screws or bolts, drilling through the existing holes from the pool table's felt. Countersink the screws slightly and fill the holes with wood filler. Sand the surface until it is smooth.

5. Cover the Tabletop:

Cover the plywood tabletop with the felt or fabric of your choice using adhesive spray. Stretch the material taut and trim any excess. Secure the edges of the fabric using a staple gun or tacks.

6. Finishing Touches:

If desired, you can paint or stain the base of the table to match your décor. Apply a primer first to ensure the paint adheres properly. Once the paint or stain is dry, allow the table to cure for the recommended time.

Additional Considerations:

When converting a pool table into a dining table, there are a few additional factors to consider:

Table Height: The height of the dining table should be approximately 28-30 inches from the floor. If the pool table is significantly taller or shorter, you may need to adjust the height of the legs or pedestal.
Table Width: The width of the dining table should be proportional to the size of your dining room. A pool table typically has a width of 48-54 inches, which is suitable for most dining rooms. However, if your space is smaller, you may want to consider a narrower table.
Table Length: The length of the dining table should depend on the number of people you want to accommodate. A pool table typically has a length of 8-9 feet, which can seat up to 8 people comfortably.

With careful planning and execution, you can transform your old pool table into a stylish and functional dining table. It's a unique DIY project that can add both charm and functionality to your home.

Turn Your Dinner Table Into A Pool Better Living

Billiard Table Convertible Into A Dining

How Quickly Can They Turn This Dining Table Into A Pool Pooltable Dinetopoolcallenge Homedecor Homeinspiration Interiordesign Diningtabledecor Diningtable

Fcsnooker Presents The Royal Turned Leg Convertible English Pool Dining Table In Mahogany Also Available Manufactured Oak And Walnut Veneered Laminates Presented 6 7 Foot Sizes