Wood Plank Dining Room Table

A wood plank dining room table is a beautiful and rustic addition to any home. It is perfect for large families or those who love to entertain. A wood plank dining room table is also relatively easy to make, so you can save money by building your own.

Materials You'll Need

To build a wood plank dining room table, you will need:

12-16 wood planks (1" x 12" x 8')
4 legs (4" x 4" x 36")
Wood glue
Clamps
Screws
Finishing nails
Sandpaper
Stain or paint (optional)
Polyurethane

Instructions

To build a wood plank dining room table, follow these steps:

Cut the wood planks to length. The length of the planks will depend on the size of the table you want to build. For a 6-foot table, you will need to cut the planks to 6 feet long. For an 8-foot table, you will need to cut the planks to 8 feet long.
Lay the planks out on a flat surface. Make sure that the edges of the planks are flush. Apply a generous amount of wood glue to the edges of the planks. Clamp the planks together. Do not apply glue to the ends of the planks.
Allow the glue to dry for 24 hours. Once the glue is dry, you can remove the clamps.
Turn the table upside down. Attach the legs to the bottom of the table using screws. Make sure that the legs are evenly spaced.
Sand the table to smooth out any rough edges. You can also use a sanding block to get into the corners of the table.
Stain or paint the table (optional). If you are staining the table, use a penetrating stain that will not sit on top of the wood. If you are painting the table, use a high-quality paint that will resist chipping and peeling.
Apply a coat of polyurethane to the table. Polyurethane will protect the table from scratches and water damage. Allow the polyurethane to dry for 24 hours.

Tips

Here are a few tips for building a wood plank dining room table:

Use high-quality wood. The type of wood you use will affect the durability and appearance of the table. Hardwoods, such as oak and maple, are more durable than softwoods, such as pine and fir.
Cut the planks to the correct length. If the planks are too short, the table will be unstable. If the planks are too long, the table will be too heavy.
Apply a generous amount of wood glue to the edges of the planks. The wood glue will help to hold the planks together.
Clamp the planks together tightly. The clamps will help to keep the planks in place while the glue dries.
Sand the table to smooth out any rough edges. Sanding will also help to remove any excess glue.
Stain or paint the table (optional). Staining or painting the table will give it a custom look.
Apply a coat of polyurethane to the table. Polyurethane will protect the table from scratches and water damage.